Homebrew 10 meter vertical

I’m working on a 10 meter vertical antenna for the roof of my house. It’s a quarter wave ground plane centered on 28.8 MHz, so it will be 97.5″ tall with 4 97.5″ radials. I used the formula Length of Dipole (feet) = 468 / Frequency (MHz). Since the radials comprise one half of the dipole and the vertical is the other half, you divide the length by 2.
I’m looking for some 1/4″ diameter fiberglass rod for the vertical. We get a lot of wind in Colorado so it needs to be tough. The base is a 1/4″ thick aluminum plate with a SO-239 bulkhead connector. I will weld on a round piece of stock on the top side, then turn it on my lathe as a receiver for the fiberglass rod. A length of 14 gauge stranded copper will live inside the fiberglass tube.
Here are some pictures of the base that I started on today:

20120729-145340.jpg

20120729-145351.jpg

This entry was posted in N0BCB and tagged .

Post a Comment

Your email is never published nor shared. Required fields are marked *

*
*